Never
!
Never
leave children unsupervised in a room where the heater is ON and
unguarded.
!
Never
obstruct or cover the fan outlet or force items into heater openings.
!
Never
install or use the heater anywhere where water is in use, i.e.
Bathrooms, Kitchens, Shower Rooms, Swimming Pools etc.
!
Never
use aerosols or steam cleaners on or around the heater.
!
Never
route the electric supply cable under carpet etc.
!
Never
install the heater close to curtains or combustible materials.
!
Never
use the heater to dry clothes etc.
!
Never
sit or stand on the heater.
FITTING THE HEATER
The installation of this heater requires a reasonable level of DIY skills.
Please read this guide thoroughly before commencing installation and if in doubt,
seek help from a competent person.
Do I need any tools?
1.
Depending upon the chosen method of installation you may need the following
tools: -
!
A Hexagonal Key (Supplied with the heater).
!
A Pozidrive / Phillips / cross head screwdriver
. This should have a number 2 size
tip.
2.
If drilling into brickwork you will need a power drill (preferably with hammer action)
and appropriate size drill bit for the wall plugs supplied.
Where can I fit the heater?
This heater can be fitted into fireplaces or surrounds where the following dimensions
are available.
Width
400mm - 450 mm (15.35 inches - 17.72 inches)
Height
555mm - 590 mm (21.9 inches - 23.2 inches)
Depth
At least 75mm (At least 3 inches)
An optional spacer frame kit is obtainable either from the your heater supplier or direct
from Baxi Fires Division Sales. The kit is a 75mm (3 inch) spacer kit (Kit number
0582631).
Page 5
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.