Baxi Fires Division 826 dream longlite Installer And Owner Manual Download Page 12 | Manualshive

Page: 12 / 14

Baxi Fires Division 826 dream longlite Installer And Owner Manual Download Page 12

USING THE HEATER

Important Safety

Never cover the heater or obstruct the openings at the base of the heater, this could
cause overheating and consequent risk of fire.

What are the fireslide control positions for?

The heater is operated by the fireslide control located on the upper right hand side of the
heater.

Fireslide Position

OFF

The flame effect and heater are OFF.

Only the flame effect operates

1kW fan heat setting and flame effect.

2kW fan heat setting and flame effect.

CLEANING AND MAINTAINING THE HEATER

How do I clean my heater?

The heater fascia and plastic parts need only to be wiped clean with a dry soft cloth, do
not use polishes or abrasive materials.

I have a problem with my heater!

Important Safety

Before undertaking maintenance or replacing the light bulb always disconnect the
heater from the electricity supply by removing the 3 pin plug and allowing the
heater to cool completely.

1. My heater is on but there is no light.

This is possibly a light bulb failure. Remove the light bulb as follows and check it in a
table lamp that is known to work. If it does not work in the table lamp then replace as
below.
The light bulb fitted to this heater is a 60Watt max, BC Clear, 16,000Hr (GLS)
Bayonet, 240V lamp, but due to the indeterminate life span and ease of replacement, it

Page 12

INSTALLER AND OWNER GUIDE

©

Baxi Heating U.K. Limited 2006.

«
...
10
11
12
13
14
»

Summary of Contents for 826 dream longlite















Reviews:

No comments