Fitting the doors.
The stove is supplied with the doors removed in order
to prevent damage during transportation. Unpack the
doors and hinge pins. Fit the doors one at a time. To do
this locate each door over the stove hinge and secure in
place by firmly pushing a hinge pin into each door
hinge.
Fitting the loose coal.
!
We recommend that the floor is protected with a
suitable covering to prevent staining or discolouration
by the coals.
!
Open the box / pack of loose coal and position the
coal on top and in front of the plastic fuel support.
Arrange the coal to your liking. It is not necessary to
use all of the coal.
OPERATING THE STOVE
Never cover the stove or obstruct the opening at the base of the stove, this
could cause overheating and consequent risk of fire.
The appliance can be controlled by the controls located underneath the controls
cover (Pull knob on front of stove), or by using the remote control handset.
Stove Controls
The following are located under the controls cover.
Page 6
INSTALLER AND OWNER GUIDE
©
Baxi Heating U.K. Limited 2006.
Figure 2. Fitting the doors
Figure 3. Stove controls