Baumuller PCC-04 Instruction Handbook Manual Download Page 61

Page: 61 / 82

Operation

Instruction handbook

Control system

PCC-04

Document No.: 5.16002.03

of 80

8.4.6

Hot Keys

The Intel

graphic driver is available of predefined and assignable hot keys to select an

active display and its degree value for the turn at the beginning. Assignment can be
changed as explained in the following:

Click on the "Options and Support" button

Figure 28:

Modification of hot key shortcuts

Set "Manage Hot Keys" menu option to "Enable".

Scroll down in the list till to the required action. Write down the button combination of
the hot key of the selected action.

In order to change the button combination of the hot key in the accordant point enter
the new button combination.

Click on "Apply" button to save the new hot key combination in the current profile.

The new hot key combination can be saved as a new profile as well.

NOTE!

At the login procedure to the system the hot keys were switched off.

Summary of Contents for PCC-04



















































































Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands

Baumuller PCC-04, Instruction Handbook Manual

Search results

Summary of Contents for PCC-04

Reviews:

Related manuals for PCC-04

Brands by name

Popular brands