Baumuller PCC-04, Instruction Handbook Manual

Page: 53 / 82

n
Enable “Auto Right Click” in the Touchkit utility. This allows a constant touch to
“call” a right click.
n
Enable “Display key” in the Touchkit utility displays a mouse in the lower right cor-
ner of the screen. Click the mouse to alternate between right and left click of the
mouse.
n
Touch the “Right Click” key in the OnScreen tools palette.
Operation
Instruction handbook Control system PCC-04
Document No.: 5.16002.03
53
of 80
8
Right-click the icon in the notification area and to display the menu.
Figure 20: Touchkit-menu
Touchkit menu functions
NOTE!
Multiple methods are available to emulate a right mouse click.
Menu Function
Apply to Touchscreen Selects the touchscreen controller. The PCC-04 uses a
controller called “USB Controller.
Mouse Mode Selects the mouse mode (see
Z
Mouse modes
–
on page 44).
Beep Selects the Beep mode (see
Z
Audio acknowledgment
–
on page
43).
Auto Right Click When checked, touch the screen for an extended time period
simulates a right click (see
Z
Mouse modes
–
on page 44).
Display key When checked a mouse icon appears on the display screen
showing the active mouse button in red. Touch the icon to change
the active mouse key
4 Points calibration Launches the “4 Points Calibration” utility (see
Z
4 Points Calibra-
tion
–
on page 47).