Baumuller PCC-04, Instruction Handbook Manual

Page: 51 / 82

Operation
Instruction handbook Control system PCC-04
Document No.: 5.16002.03
51
of 80
8
Click the “Support Edge Compensation” key to activate/deactivate the edge compensa-
tion utility.
To adjust all edges of the display “in,” click the “-10%” key. Each successive click brings
the edge in 10%. To adjust all edges outward, click the “+10%” key. The relative position
of each edge is shown on the sliders above. To return all sliders to 100%, click the “De-
fault” key.
8.3.4 Touchkit Hardware
The “Hardware” tab displays controller and firmware information about the touch screen.
This information may be required if problems occur.
Figure 18: „Touchkit Hardware“ dialog box