TAM 00746
9
DSP1 045 - 100
11 / 2019
Three phase synchronous motor
English
Vibration quality (EN 60034-14)
Standard: A
Special: B (with deep groove ball bearing)
Concentricity (DIN 42955)
Standard: N
Special:
R (reduced)
Vibrations and resistance to vibrations
radial 3 g / axial 0,5 g 10 Hz to 100 Hz
(refer to point 3.3)
Holding brake
Option
Actual speed encoder
Standard: 2-pole resolver
(high-quality version on request)
Further characteristics can be found in our technical product list on the website:
in the download area under Technical documentations. If necessary, request the corresponding
documents.
Attention!
If the electric motor supplied does not correspond to the standard version according to the technical
list or if special contractual agreements have been made, technical deviations from these commis-
sioning and maintenance instructions may exist. In this case, ask for the corresponding technical
supplements.
2.5 Transport, shaft lock, temporary storage
Water-cooled motors:
To avoid frost damage, ensure that no coolant is present in the engine during transport
or temporary storage at ambient temperatures < 3 °C.
Transport:
The permissible environmental conditions which may affect the motor during transport
can be found in DIN EN 60721-3-2 (class 2K2/2M1).. Contrary to DIN, the permissible
temperature range is reduced to - 15 °C to + 60 °C.
Appropriate load handling equipment must be used, such as webbing, loop lifting
straps, etc. The lifting lugs of the motor can also be used for lifting, if provided.
During transport, the respective country-specific regulations must be observed.
Lifting equipment, transport and load handling devices must comply with the
regulations.
Please refer to the product's technical documentation for the weight specifications of the individual
electric motors.
The motor shaft and the connection surfaces must be protected against corrosion. The motor may
only be transported with a shaft protection cover. Damage to the motor shaft must be avoided.
