Baumuller BUM64A, Manual

Page: 103 / 120

Technical specifications
Manual Single Power Unit BUM64S/A/F
Document no.: 5.01056.03
103
of 118
D
D.4 Fuses
1)
Use fuses, which will keep at the operational point the given switch-off i
2
t-value.
Keep in mind, that the fuses might be of different types and the respective fuse bases must be used.
A list of fuses you will find in Z B.3.1 Extreme range fuse gR (appliance and cable) – on page 88 and Z B.3.2 Semiconductor fuse aR
(appliance) – on page 88.
D.5 BUM64S - non-electrical data
D.6 BUM64A - non-electrical data
1)
The first value is the depth inside the switching cabinet. The second value is the depth outside the switching cabinet.
D.7 BUM64F - non-electrical data
1)
The first value is the depth inside the switching cabinet. The second value is the depth outside the switching cabinet.
NOTE
Use semiconductor- or extreme range fuses, if you intend to regard UL 508C.
Even if you do not regard UL 508C, we recommend to use semiconductor- or extreme range
fuses.
Overcurrent protection devices for mains cable
1)
according to EN 60204-1
Overcurrent protection devices for device
1)
I
2
t value
≤
320.000 A
2
s
Dimensions (W x H x D) 442 x 920 x 322 mm
Weight without controller approx. 49 kg
Degree of protection IP 00
Fight fire with ABC powder
Dimensions (W x H x D) 490 x 885 x (228+90)
1)
mm
Weight without controller approx. 50 kg
Degree of protection IP 00/outside IP 44
Fight fire with ABC powder
Dimensions (W x H x D) 490 x 885 x (228+30)
1)
mm
Weight without controller approx. 42 kg
Degree of protection IP 00/outside IP 54
Fight fire with ABC powder