Baumuller BM4-O-CAN-06, Operating Instructions Manual, Page: 7 / 60

5
von 56
Operating Instructions CANsync-Master Option Module for BM4-O-PLC
BM4-O-CAN-06
1
I
NTRODUCTION
These operating instructions are an important component of your b maXX 4400; this
means that you must thoroughly read this document, not least to ensure your own safety.
In this chapter, we will describe the first steps that you should carry out after getting this
module. We will define terms that are used in this documentation on a consistent basis
and will inform you about the topics that you must consider when using this option mod-
ule.
For more detailed information on operating and using the modules, refer to the documen-
tation entitled "Operating Instructions b maXX 4400", "Application Manual b maXX 4400"
and "Application Manual CANsync".
1.1 First Steps
1 Check the shipment see Z Packaging and transportation – from page 15 onward.
2 Pass on all the documentation that was supplied with the plug-in module to the appro-
priate departments in your company.
3 Deploy suitable personnel for assembly and commissioning.
4 Pass on these operating instructions to this personnel and ensure that they have read
and understood the safety instructions and that they are following them.
1.2 Terms Used
In this documentation, we will also refer to Baumüller's "CANsync-Master Option Module
for BM4-O-PLC " product as "option module", "plug-in module" or "CANsync-Master op-
tion module".
We will also refer to the "BM4-O-PLC-01" Baumüller product as "b maXX PLC" or "BM4-
O-PLC" and we will use the term "b maXX" for the "b maXX 4400 basic unit".
The controller in the basic unit is also referred to as the "b maXX controller".
For a list of the abbreviations that are used, refer to Z Appendix A - Abbreviations – from
page 45 onward.