Baumuller b maXX 5000 BM5800 Series, Instruction Handbook Manual

Page: 86 / 176

Connection diagrams
Instruction handbook b maXX 5800
Document No. 5.16027.04 Baumüller Nürnberg GmbH
86
of 174
7.11
7.11 Connection diagrams
7.11.1 Connection diagram overview
Figure 33: Connection diagram overview
1C1, 1D1 DC link connection, refer to Z Figure 36 – on page 89.
X2 Option: connections for additional digital inputs
X3, X4 Connection fieldbus, depending on the configuration,
refer to type code
Z Type code – on page 49
X6 Option: connections for additional analog outputs
X200 Connections for 24 V voltage supply,

refer to Z X200 (SELV/PELV) – on page 92.
NOTE!
The identifiers 1C1 and 1D1 were taken over from DIN EN 60445. 1C1 is the connec-
tion to the positive DC link cable/bar, and in the past was identified by Baumüller in
some devices as ZK+. 1D1 is the connection to the negative DC link cable/bar, and
in the past was identified by Baumüller in some devices as ZK-.
Fieldbus IN
Fieldbus OUT
DC link
connec
tion
to mains inverter or
fu
rt
he
r
Axis module
1
(sin
g
le od
er
do
ub
le
a
xis)
Axis module
2
(sin
g
le od
er
do
ub
le
a
xis)
Axis module
3
(sin
g
le od
er
do
ub
le
a
xis)
Option:
digital
inputs
Option:
analog
outputs
multi-ax
is c
ontroller