Cordless Pole Chainsaw
6
Pole Chainsaw Assembly
IMPORTANT!
The chainsaw may come with plastic spacers over or around the bar studs - the spacer is for
shipping purposes only and must be removed before mounting the chain bar. After removing the chain brake
cover, remove any spacers, then mount the chain bar as described. Failure to remove any spacers before
assembling and using the chainsaw will present an injury hazard, damage the unit and will void the warranty.
WARNING!
Cutting edges on chain are sharp. Use protective gloves when handling chain.
1. Remove battery from chain saw.
2. Attach chain saw to the head of the pole plug in the under pole with a handle.
IMPORTANT
: When inserted, #1 would have to be in line with #2, and must be inserted in the end (see
image below).
3. Lock the pole joints together.
