Baumer NE214, Operating Instructions Manual

Page: 45 / 52

NE214
www.baumer.com 45
5.2 Programming lines
Line Default settings Short description
01 XP - Current counter status
02 P1 - Preset value 1
03 P2 - Preset value 2
04 SC - Start count value
05 ∑ - Totalizer
06 - Hour counter
10 Separating line
11 XP - Current counter status
12 P1 - Preset value 1
13 P2 - Preset value 2
14 SC - Start count value
15 ∑ - Totalizer
16 - Hour counter
20 Separating line
22 Operating mode
23 Scaling factor
24 Decimal point
25 Counting mode
26 Frequency main counter track A
27 Frequency main counter track B
28 Input logic
29 Reset main counter
31 Function signal input 9 (stop/hold/print)
33 Output logic for digital outputs
35 Output time P1
36 Output time P2
37 Acceptance of presets P1, P2, SC
38 P1, P2 and SC active
39 Function key assignment
40 Code setting
41 Batch counter functions
42 Batch counter as multiplier
51 Baud rate
Only with version implementing
interface or analog output.
52 Parity
53 Stop bits
54 Adress
61 Analog output assignment
62 Analog output offset
63 Assignment of lower analog limit
64 Lower analog limit
65 Assignment of upper analog limit
66 Upper anaolg limit
67 Separating line