12
Replacement parts
A wearing part is part of a component, or a component itself, that is
designed in such a way that it will wear in time if used correctly.
This increases the service life of the system itself substantially.
These parts must be replaced regularly. The statutory warranty
period or contractually agreed guarantee conditions are not valid
for wearing parts, unless explicitly agreed otherwise.
The following components are considered wearing parts:
n
Moving parts of an application head (e.g. armature)
n
In production mode regularly moving heated hoses
n
Seals and O-rings
n
Nozzle and needle seat of an application head
n
Air pistons of adhesive pumps
n
LED lighting
n
Fluorescent tubes
n
Cleaning brushes
n
Cleaning rubbers
n
Sliding sealer for application heads
n
Filters and filter inserts
n
Air switch valves
n
Application head stroke adjustment
n
Shuttle valve and ball seat of adhesive delivery units
n
Stop washers
The replacement parts lists below may contain other component-
specific wearing parts.
12.1 Replacement parts ULT 400 XL
12.1.1
Sensor ULT 400 XL
Connection cable:
Item number
Description
77741205
Connection cable 0.5 m
77741220
Connection cable 2.0 m
77741230
Connection cable 3.0 m
77741233
Connection cable 3.3 m
77741250
Connection cable 5.5 m
77741260
Connection cable 6.0 m
77741270
Connection cable 7.0 m
77741291
Connection cable 10.0 m
Wearing parts
Replacement parts
Replacement parts ULT 400 XL > Sensor ULT 400 XL
04.05.2021
ULT 400 XL
50