BUDE_Manual_DeviceNet_EN.doc 15/15
Baumer
Hübner
GmbH
MB704.E – 10A1 – Firmware version 1.01
P.O. Box 12 69 43 · D-10609 Berlin, Germany
22.10.2010 / bja
Phone: +49 (0)30/69003-0 · Fax: +49 (0)30/69003-104
·
www.baumer.com
Technical modification reserved
9.2
Display elements (status display)
A DUO LED (green/red) is located in the bus cover which works in accordance with DeviceNet specification
in the combined module/network status and supplies information about the status of the encoder and the
network.
LED status
Status
Description
Off Not
connected
No power supply
-
Dupl. MAC-ID Check not finished.
-
Power supply not connected
-
Green flashing
Device active and online
No connections set up
The device is working under normal conditions and
is online, but no connection has been set up.
-
The encoder has not yet been configured by the
master
-
Configuration not complete or faulty
-
Green
Device active and online
Connections are set up
The device is working under normal conditions and
is online, connections in "set up" status“
Red
Critical device error critical
communication error
The device is an irreparable error status
-
No network communication possible
-
User address has been assigned twice (MAC-ID)
-
Red flashing
Repairable error
I/O connections are in time-out status
