Baumer 11192208 Operating Manual Download Page 31

Page: 31 / 226

V2.6 | 8/30/2022 | 1120758

4.4 Lens mounting

Notice

Avoid contamination of the sensor and the lens by dust and airborne particles when

mounting the lens to the device!
Therefore the following points are very important:

▪

Install the camera in an environment that is as dust free as possible!

▪

Keep the dust cover (bag) on camera as long as possible!

▪

Hold the camera downwards with unprotected sensor.

▪

Avoid contact with any optical surface of the camera!

Caution

Do not use grub screws to lock an M58 lens directly to the camera. These

can damage the threads of the lens! The grub screws are used only to lock

the lens mount adapters.

Summary of Contents for 11192208



































































































































































































































Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands

Baumer 11192208, Operating Manual

Search results

Summary of Contents for 11192208

Reviews:

Related manuals for 11192208

Brands by name

Popular brands