Baumer 11192208 Operating Manual Download Page 212

Page: 212 / 226

212

V2.6 | 8/30/2022 | 1120758

7.22.14 boSerialMode

States the interface mode of the serial interface.

Name

boSerialMode

Category

boSerialControl

Interface

IEnumeration

Access

Read only

Unit

Values

Bypass

(except .EF)

UART1 of Power and Process Interface and UART0

Interface are connected.

Off

The serial interface is off and shall not be used

Optic Control

The serial interface shall be used for optic control.

bo Serial Con-

trol

The serial interface shall be used for bo serial control.

7.22.15 boSerialRead

Command to read data from serial interface.

Name

boSerialRead

Category

boSerialControl

Interface

ICommand

Access

Write only

Unit

Values

7.22.16 boSerialSelector

Selects which serial interface to configure.

UART1

UART0

Name

boSerialSelector

Category

boSerialControl

Interface

IEnumeration

Access

Read / Write

Unit

Values

UART0

Selects the UART0 Interface which can be used, for ex-

ample, to control optical components.

UART1

Selects the UART1 Interface which is part of the Power

and Process Interface and can be used for RS232 com-

munication.

Summary of Contents for 11192208



































































































































































































































Search results

Summary of Contents for 11192208

Reviews:

Brands by name

Popular brands

Baumer 11192208, Operating Manual

Search results

Summary of Contents for 11192208

Reviews:

Brands by name

Popular brands