Baumer 11192208, Operating Manual, Page: 194 / 226

194
V2.6 | 8/30/2022 | 1120758
7.20.2.32 GevSCPHostPort
Controls the port of the selected channel to which a GVSP transmitter must send data
stream or the port from which a GVSP receiver may receive data stream. Setting this
value to 0 closes the stream channel.
Name GevSCPHostPort
Category
GigEVision
Interface IInteger
Access
Read / Write
Unit -
Values
0 ... 65535 (Increment: 1)
7.20.2.33 GevSCPInterfaceIndex
Index of the logical link to use.
Name GevSCPInterfaceIndex
Category GigEVision
Interface IInteger
Access Read / Write
Unit -
Values 0 ... 3 (Increment: 1)
7.20.2.34 GevSCPSDoNotFragment
The state of this feature is copied into the "do not fragment" bit of IP header of each
stream packet. It can be used by the application to prevent IP fragmentation of packets
on the stream channel.
Name GevSCPSDoNotFragment
Category GigEVision
Interface IBoolean
Access
Read / Write
Unit -
Values
true = 1 (On)
false = 0 (Off)
7.20.2.35 GevSCPSFireTestPacket
Sends a test packet. When this feature is set, the device will fire one test packet.
Name
GevSCPSFireTestPacket
Category GigEVision
Interface
IBoolean
Access Read / Write
Unit
-
Values
true = 1 (On)
false = 0 (Off)