INSTALLATION INSTRUCTIONS
VENTILATION OF ROOMS
The actual ventilation requirements must be determined by reference to the Statutory
Regulations in force.
GAS CONNECTION
With one exception these appliances must be connected to the gas supply by use of the ½ BSP Elbow,
seal and copper pipe and an isolation tap fitted in an easily accessible position.
The one exception to the above is for the BT62 Hob unit when installed into the CK5 Cooking centre for
which connection to the gas supply must be made via a flexible hose in compliance of BS6172.
This appliance as supplied is for use with Natural Gas, if it is to be adapted for LPG proceed as follows:
1. Isolate the appliance from the electricity and gas supplies.
2. Remove the pan supports and burner assemblies.
3. Replace the injectors with the alternative LPG injectors, supplied.
4. Use the appropriate thread sealant and check for gas soundness.
5. Affix the self-adhesive label to the rating plate to amend the Gas Category details.
Fig. 2
Fig. 3
10
