Baumatic OMBRA6BL, Instruction Manual

Page: 27 / 36

o
IMPORTANT: The minimum flow adjustment process must
be completed before the appliance is next used.
o
To activate the procedure for selecting the combustible gas
used, turn on the hob but
keep the burners off .
o
Press the minus button for burner 1, minus button for burner
2 and the minus button for the timer all at the same time for
at least two seconds.
o
When the procedure is activated all burner power level
displays will turn off and the timer display will show “Met” or
“Lpg” depending on the current configuration.
o
By pressing the timer plus and minus buttons, the desired gas
can be selected.
o
To confirm the gas and end the procedure, press the timer
button. It will return to the initial configuration with all
displays at level 0 and the time displayed on the timer.
o
Any previously programmed timers will be cancelled.
Minimum flow adjustment for the hob gas tap.
All work must be carried out by a GASSAFE
registered engineer.
27
o
This procedure is activated by pressing the plus and minus
buttons for burner 1 together with the plus and minus buttons
for burner 5 in a continuous manner for three seconds. All the
burners must be off.
o
The activation of the procedure is signalled on the display
with the word “MIN”.
o
Select the burner to regulate by pressing the minus and plus
buttons for the timer and press the timer button to confirm.
o
The selected burner will ignite at the minimum level and it will
be possible to increase or decrease the flow rate to the
minimum level using the plus and minus buttons for the
relevant burner.