Switching the hob on
o
The hob can be switched on by pressing the ON / OFF button
(1)
and holding it down for at least two seconds.
o
Once activated, the five displays related to the burners will show
level 0, which indicates that the cooking zones are off.
o
If additional operations are not performed after the hob is
switched on, it will automatically switch off after one minute.
Automatic ignition with flame failure safety device
The appliance is fitted with a flame failure safety device on the burner,
which is designed to stop the flow of gas to the burner head in the
event of the flame going out.
To ignite a burner:
o
Press down and release the plus button
(8)
for the selected
burner and within three seconds press the plus button again.
o
Following this, the cooking zone will ignite at level 7, which is the
maximum power level.
o
The ignition of the cooking zone is also signalled by the
corresponding LED indicator
(11)
that will remain active for the
entire period that the burner is in use.
To adjust the burner’s power level:
o
Once the burner is lit you can select the gas flow rate by using
the relevant plus and minus buttons.
o
The burner is set automatically to the maximum level of 7 when
the burner is lit. To decrease it, press the relevant minus button.
12
Summary of Contents for OMBRA6BL
Page 1: ...1 el OMBRA6SS BL W R 75 cm Touch control gas hob...
Page 30: ...30...
Page 35: ...35...
Page 36: ...36...
