background image

The hob timer (linked to a cooking zone) 
 
You are able to link a countdown time to a cooking zone so that when 
the countdown time has elapsed the cooking zone will switch off 
automatically. 

 
 

o

 

Press the ON/OFF button to turn the hob on. 

 
 
 
 

 
 

o

 

Press the cooking zone selection button of the 
cooking zone that you want to use and place a 
suitable pan on the selected cooking zone. 

 
 

 

o

 

Touch the “+” or “-“ on either timer control. 
The timer indicator will start to flash and 
“10” will show in the timer display. 

 
 

 

o

 

Touch the “+” or “-“ button to increase or 
decrease the time by 1 minute. Press and hold the 
“+” or “-“ button to increase or decrease by 10 
minutes. 

 
 

o

 

Pressing the “+” and “-“ buttons together 
will cancel the alarm time and “00” will 
show in the minute display. 

 
 
 

 

o

 

NOTE: The red dot next to power level 
indicator will illuminate indicating that the 
zone is selected. 

 

o

 

When the required countdown time is shown 
in the display, release all controls. The 
display will flash for 5 seconds and show the 
remaining time and the countdown                   

                                   begins automatically.

 

 

 

 

18

 

Summary of Contents for BHI645SS





































Reviews: