Baumatic BHC600, Instruction Manual, Page: 19 / 28

o
Carefully turn the hob upside down and place it on a cushioned
mat.
o
Apply the sealing strip provided around the edge of the
appliance.
o
The protective covering must be removed from both sides.
o
Do not leave a gap in the sealing agent or overlap the thickness.
o
IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
There are holes on the
base or the sides of
the hob that you can
fix the four brackets
to. There are three
holes in each one of
the brackets.
19