INSTALLATION INSTRUCTIONS
INSTALLATION NOTES
1. Cut the aperture to the dimensions shown below or use the template if printed on the
packaging.
2. Invert the Hob and apply the sealing agent provided to match the outer perimeter edge.
3. If the sealing agent is a strip type, the protective covering must be removed from both
sides.
Do not leave a gap in the sealing agent or overlap the thickness.
NOTE: do not use any Silicone based sealant, as this can damage the worktop surface
if repairs are required.
4. Insert the appliance into the aperture and fix in position via the clamps & screws,
tightening the screws evenly (see Fig. 1 below).
5. If the appliance is to be installed in a Leisure Accommodation Vehicle, the
requirements of N 721 must be applied.
HOB APERTURE DIMENSIONS
Fig.1
Model
A
B
C
D
E
B60
595 500 560 480 30
B61
595 500 560 480 30
B62
595 510 560 480 30
BT62
595 510 560 480 30
B67
685 510 560 480 30
B68
685 510 560 480 30
B69
685 510 560 480 30
B16.5
860 510 830 480 30
B16.6
860 510 830 480 30
BG2
288 510
490 268
30
BWK1
288 510
490 268
30
B17.5
860 510 830 480 30
B17.6
860 510 830 480 30
B17.7
860 510 830 480 30
PG2
288 510 285 480 30
PWK1
288 510
490 268
30
P62
585 500 560 480 30
P68
685 500 560 480 30
P75
740 500 560 480 30
P90
860 510 830 480 30
PF75
740 500 700 480 30
B44
600 510 560 480 30
B46
600 510 560 480 30
BC45
600 510 560 480 30
BF45
600 510 560 480 30
AS24
595 510 560 480 30
AS25
740 510 560 480 30
9
