o
IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
(B) Fixing
bracket
(C) Screw
o
Place a fixing bracket (B) over the hole in each corner of the
underneath of the hob. Then place a screw (C) through the hole
and fixing bracket (B). Tighten the screws partially, so that the
fixing brackets stay in place. IMPORTANT: Do not tighten the
screws fully.
o
Carefully turn the hob back over
and then gently lower it into the
aperture hole that you have cut
out.
o
On the underneath of the hob,
locate the fixing brackets (B) and
turn them so that they locate on
the underneath of the worktop
and the hob.
o
Fully tighten the screws (C) to secure the hob into position.
29
Summary of Contents for BFI40SS
Page 1: ...1 BFI40SS 60cm Front touch control induction zone hob...
Page 35: ...35...
Page 36: ...36...
