background image

Important safety information 

 

Your safety is of the utmost importance to Baumatic. 
Please make sure that you read this instruction booklet 

before

 attempting to install or use the appliance. If you 

are unsure of any of the information contained in this 
booklet, please contact the Baumatic Technical 
Department. 
 

General Information 
 

o

 

This appliance is designed for domestic household use and for 
the cooking and frying of domestic foodstuffs. 

 

o

 

IMPORTANT: 

The adjacent furniture and all materials used in 

the installation 

must

 be able to withstand a minimum 

temperature of 85°C above the ambient temperature of the 
room it is located in, whilst in use. 

 

o

 

Certain types of vinyl or laminate kitchen furniture are 
particularly prone to heat damage or discolouration at 
temperatures below the guidelines given above. 

 

o

 

Any damage caused by the appliance being installed in 
contravention of this temperature limit, 

will be the liability of 

the owner.

 

 

o

 

Your new appliance is guaranteed against electrical or 
mechanical defects, subject to certain exclusions that are noted 
in Baumatic’s Conditions Of Guarantee. The foregoing does not 
affect your statutory rights.

 

 

o

 

The use of this appliance for any other purpose or in any other 
environment without the express agreement of Baumatic Ltd. 
will invalidate any warranty or liability claim. 

 

o

 

You should not use this appliance to store items on or as a work 
surface. 

 

o

 

No modifications to the appliance are permitted by Baumatic Ltd. 

 

o

 

You should not store or place flammable or highly flammable 
liquids/materials on top of or near the appliance. Items made 
from aluminium, plastic or plastic film should also be kept away 
from the appliance, as they may fuse to the surface. 

 

o

 

Repairs may only be carried out by Baumatic Service 
Engineers or their authorised service agent.

 

 

 

5

Summary of Contents for BF15.1SS

































Reviews: