background image

Cleaning 

 

o

 

Cleaning of the hob should be carried out on a regular basis. The 
solid plates should also be maintained on a regular basis.

 

 

o

 

IMPORTANT: 

Before attempting to clean the appliance or 

maintain the plates, it should be disconnected from the mains 
and cool.

 

 

o

 

Great care should be taken whilst using this appliance and when 
following the cleaning procedure.

 

 

o

 

You should not use a steam jet or any other high pressure 
cleaning equipment to clean the appliance.

 

 
Installation 

 

This appliance must be correctly installed by a 
suitably qualified person, strictly in accordance 
with the manufacturer’s instructions. Please see 
the specific section of this booklet that refers to 
installation. 

 

o

 

Baumatic Ltd. declines any responsibility for injury or 
damage, to person or property, as a result of improper 
use or installation of this appliance.

 

 

Declaration of conformity 
 

This appliance complies with the following European Directives: 

 
-73/23/EEC dated 19/02/1973 Low Voltage Directive. 
-89/336/EEC dated 03/05/1989 EMC Directive inclusive of 
Amending Directive 92/31/EEC. 
-93/68/EEC dated 22/07/1993 CE Marking Directive. 
-89/109/EEC dated 25/01/1992 Materials that can touch food. 
 

o

 

The manufacturer declares that the hob is built using certified 
materials and requires the appliance to be installed in 
accordance with the standards currently in force. This appliance 
must be used by a trained person for domestic purposes only. 

 

To avoid damaging your appliance 
 

o

 

Cast iron and cast aluminium cookware with damaged bases 
may scratch the hob surface if they are dragged across it.

 

 

o

 

Pans should be lifted on and off the hob surface and not 
dragged.

 

 

7

Summary of Contents for B54SS

























Reviews: