5.
Install quick lock pin (A) in lower hole as shown
in Lift Arm Lock Engaged illustration.
A
Lift Arm Lock Engaged
6.
Lower lift arms until lift arm lock is tight against
cylinder barrel.
7.
Stop engine and remove key.
Disengage Lift Arm Lock
1.
Start engine.
2.
Verify the area is clear of bystanders and
obstructions.
3.
Fully raise lift arms.
4.
Shut off engine and remove key.
5.
Pivot lift arm lock up and attach to lift arm with
quick lock pin (A) in upper hole as shown in Lift
Arm Lock Disengaged illustration.
6.
Lower lift arms to ground.
7.
Shut off engine and remove key.
4.9 First Time User Tips
First, operate all functions in a clear area with
throttle at low idle to get a good feel for the controls.
Move the skidsteer slowly until you have a better
feel how much the unit can take.
Each operator must experiment to find a technique
that works for them in their application.
24
