5 SERVICE AND
MAINTENANCE
5.1 Maintenance
^
WARNING
Moving parts can crush and cut�
Keep clear of moving components�
Lockout operating unit before
performing inspections or maintenance�
5.2 Inspections
Check hydraulic hoses and fittings daily for leaks.
Replace hose if worn or damaged.
Inspect the unit for any damage. Repair or replace
parts as needed.
5.3 Lubrication
1.
Lower tree spade to ground.
2.
Set parking brake, stop engine and remove
key.
3.
Pump grease into grease fittings on each end
of swing cylinder (1) and swing pivot (2).
A
B
4.
Pump grease into grease fittings 3-point
adapter.
20