^
Keep bystanders, livestock, pets, etc away
from work area.
^
Always wear protective equipment appropriate
for the job.
^
Do not operate, work on or around this machine
while under the influence of alcohol, drugs or if
feeling ill.
^
Keep clear of moving machinery at all times.
^
Stop tractor engine before leaving operators
area.
^
It is your responsibility to operate this equipment
safely. You must be familiar with the equipment
and all safety practices before use.
^
Do not allow untrained or unqualified people to
operate this equipment.
4.2 Initial Setup
1.
Remove tractor top link and center support
bracket (1).
2.
Position tractor and connect bottom links to
side brackets (2).
3.
Adjust links and depth settings so that bottom
links are at recommended dimension (3) above
ground level.
Dimension 3:
•
PT324 - 15 in. (381 mm)
•
PT330, PS330 & PT440 - 10 in. (254 mm)
4.
Switch tractor engine off.
5.
Connect hydraulic hoses to tractor.
4 OPERATION
4.1 Preparation For Use
^
WARNING
Prevent serious injury�
Verify bystanders are away and operator
is in a safe area to avoid pinching/
crushing�
Spade may move erratically due to air in
the hydraulic system�
^
CAUTION
Prevent injury�
Pushing the tilt lever will result in the
valve moving toward you�
This could accelerate movement
unexpectedly�
6.
Start tractor engine and carefully move tilt lever
so plate (4) is vertical. Switch tractor engine
off.
7.
Install and adjust top link and center support
bracket (1) as necessary to keep plate (4)
vertical. Center support bracket (1) may need
to be cut for proper setting. Do not cut end that
connects to tractor top link.
1
4
2
3
10