6�5 Replace Cutting Teeth
1. Park skidsteer and mulcher on a level surface.
2. Lower mulcher to the ground.
3. Shut off engine and remove key.
4. Inspect cutting teeth (A) for damage and wear.
Replace individual teeth as needed.
5. Remove socket head cap screw (B) and tooth
(A). Install new tooth.
6. Tighten socket head cap screw (B) to 170 lb/ft
(231 Nm) of torque.
Note:
Parts breakdown can be found on
Baumalight’s website.
www.baumalight.com
A
B
700 Series Teeth
B
A
900 Series Teeth
A
B
1100 Series Teeth
24
