4.5 Initial Startup
Perform an initial startup and carefully move drop
saw and boom to all positions to verify hoses will
not be damaged.
Carefully watch the circled areas in below images
to be sure hoses are not pinched or kinked.
Reroute if damage may occur.
Baumalight does not provide these hoses
and they are not covered by the Baumalight
warranty�
4.6 Detach Drop Saw
^
WARNING
Prevent serious injury or death�
1�
Park machine on firm, level surface.
2�
Engage parking brake�
3�
Disconnect hydraulic drive�
4�
Shut off engine and remove key�
1. Park on a level surface.
2. Lower drop saw to the ground.
3. Shut off engine and remove key.
4. Disconnect hydraulic hoses.
5. Detach drop saw from excavator. See
Operator’s Manual.
13