Further indications are given in the pages to follow and in the user instructions.
Water supply indicator
Check the appliance fills with water.
Lower spray arm block indicator
Release the spray arm.
“Water stop” device indicator
“Water stop” device not working.
Switch off the dishwasher and shut off the water tap.
Rinse aid level indicator
Add rinse aid.
Salt level indicator
Add regeneration salt; only add regeneration salt
immediately before starting a wash programme.
Programme progress indicator
Start button
Indicator lamp lit while the dishwasher
is operating.
Flashes when a fault occurs.
Switches off at the end of the
programme.
On / Off Button
Pre-rinse/Pre-wash
Washing
Drying
Programme end
Options
Eco-Dry
The indicator lamp switches on during dry cycles without fans.
Delayed start button
The wash cycle can be programmed to start after 3-6-9 hours.
Then press the Start button.
The dishwasher will start at the set time.
Programme Symbol
and Temperature
Programme selection and
recommended load type
Place the detergent in the:
small
large
compartment
compartment
Consumption
1)
Normal load
Water
(Litres)
Energy
(kWh)
Time
(Min.)
Pre-wash
Crockery to be washed later.
-
-
5.0
0.02
9
Rapid 40° C
Lightly soiled crockery with no dried-on food.
-
X
13.0
0.85
30
Bio-Normal 50° C
2)
Normally or heavily soiled crockery with dried-on food.
X
X
16.0
1.40
86
Normal 65° C
3)
Normally or heavily soiled crockery with dried-on food.
X
X
16.0
1.60
86
Intensive 70° C
Heavily soiled pans and saucepans.
X
X
21.0
1.68
93
Quick Reference Guide
GB
5019 100 90230
(We reserve the right to make technical modifications)
1)
Values may vary in relation to usage, e.g.: different loads,
water temperatures - above or below 15° C - as well as water hardness and power supply voltage.
2)
Programme recommended when using detergents of type B (enzyme-based detergents). Reference programme for energy label.
3)
Programme recommended when using detergents of type A (non enzyme-based detergents).
GSF 5454
