2
Plan unit position
Decide on the position
and height of the unit. The
recommended basin height is
between 860mm and 870mm.
Mark the fixing positions onto
the wall.
Drill Ø 5mm holes, insert the
wall plugs and fix using 6 of
the large screws.
Place the unit centrally onto the lower bracket. Ensure it is level and
mark all 4 fixing positions onto the wall.
Remove the unit, drill Ø 6mm holes and insert the wall plugs.
Remove the drawer before installation. Pull out fully, lift the front,
pull out again, lower and fully remove.
Remove the door before installation. Loosen the screw (shown)
on both hinges, pull the door back and lift the hinges off the hinge
plates. Remove the glass shelf.
Door Unit
-
440 Door Vanity Unit only
Step 1
Vanity Unit & Basin Installation -
590 Drawer Vanity Unit is shown as a typical e
x
ample
Step 2
Step 3
860mm -
870mm
440mm -
450mm
Loosen
840mm -
513mm
850mm
590 Drawer Vanity Unit
850 Drawer Vanity Unit
365mm
440 Drawer Vanity Unit
775mm
513mm