3
Re-fit drawers:
a:
Pull out both lower drawer runners.
1:
Place the lower drawer onto the
runners.
2:
Push in until the drawer ‘clicks’ into
position.
b:
Repeat with top drawer.
Step 6
Single Door Units
Note:
only attach the handle
now if
not
changing the
opening side (see next page).
Attach handle:
Attach the
handle to the door front.
Double Drawer Units
Attach handle:
Attach the
handle to the door front.
Note:
Only re-fit door now
if
not
changing the opening side
(see next page).
Re-fit door:
a:
Reposition both hinges onto the hinge plates.
b:
Push the front until the hinge ‘clicks’ into position.
b
a
Step 7
Option 2: ‘Wall brackets’
Use the measurement above, to position the ‘wall brackets’.
a:
Important:
The measurement given
above is the maximum the brackets can
be spaced apart, the brackets must fit
within that measurement.
b:
Mark the bracket fixing holes onto the
wall. Drill Ø 8mm holes, insert the wall
plugs and attach the brackets.
c:
Important:
The brackets must be the
correct way up, as shown.
Position the unit on the brackets.
a
c
Top
b
175
mm
Step 5
a:
Check the unit is level.
If leveling is required: inside
the unit, use a screwdriver to
adjust the hanging position.
b:
To lift or lower the unit
adjust the screw shown.
c:
To move the unit closer or
further from the wall adjust the
screw shown.
b
c
a
Step 8
1
2
‘click’
1
2
‘click’
a
b