Bauer BG 25, Instruction Manual

Page: 161 / 183

MAINTENANCE
BG 25 / 2011 /
2254_BG25_en_0000498763_V01
9 - 39
9.10.7 Cardan Joint
Every 10 operating hours or daily:

Check suspension pins (see arrow) are
properly in place and firm, with the
holes for the pins completely assem-
bled.

Check rubber buffers for damage.
Kj248506.wmf
9.10.8 Sledge Sliding Strips
Every 50 operating hours or weekly:

Check the wear on the strips (1) in the runners (4) of the crowd sledge.

Where the remaining thickness (X) is found to be less than 15 mm, replace with a
new strip (see below).
4
"A"
"A"
B B
1
X
5
2
B-B
3
B0000582.wmf
To replace:

Unscrew bolts (2) and remove the tension plate (3).

Pull out the strip (1) and install a new strip.

Reinstall the tension plate and screw tight.