TRANSPORT
BG 25 / 2011 /
2254_BG25_en_0000498763_V01
8 - 2
8.2
MEASURES TO TAKE FOR TRANSPORT
MACHINE
Before loading
The machine must be put into the following shape before it may be driven onto a low-
loader or be lifted by a crane:
– all attachments have been removed from the mast,
– the mast is lowered,
– the upper mast section is removed,
– the lower mast section is removed (as necessary),
– the uppercarriage is in line with the crawlers and locked to the undercarriage,
– the crawlers are retracted,
– the beam extensions (if so equipped) have been removed.
– the counterweights have been removed (as necessary).
After loading
● Underpin the lower mast section with transport supports and secure.
● Put the safety stick of the pilot control to "OFF" position.
● Stop the engine and remove the ignition key.
● Lock the cab and remove the key.
● Put the battery main switch to "OFF" position.
● Tie the machine safely down to the deck of the transporting vehicle.
EQUIPMENT
● The rotary drive must be in upright position during the transport.
