Step 2: Attaching the Top Sifter Half
Snap the top half of the sifter body to the bottom half of the sifter
body as shown here.
Step 3: Install Pin
Next insert the engagement latch pin through the attachment
points as shown. This pin guarantees that the sifter will not
open during operation.
2
Insert Pin Here
3
Step 4: Insert Sifter
insert sifter into notched bucket as shown below.
4
Step 5: Sifting Brass
Open the separator and pour you mixed media and cases into
the sifter. Pour slowly and carefully to avoid spilling media.
5A
Now close the sifter top and reinsert the pin.
Step 6: Installing Media Shields
Install the Media Shields to the bucket as sown below in both
the front and back. This will reduce the chance of media spillage.
NOTE:
The Media Shields must be removed before and after
each tumbling.
5B
6
Summary of Contents for Frankford Arsenal Quick-N-EZ
Page 8: ......