Solarna
INSTALLATION GUIDE
The bath is supplied with 7 adjustable feet. 5 are
fitted with 2 outrigger legs supplied loose. It has a
water capacity of 215 Litres unoccupied. Bath is
filled only when user has entered and shut the door
consequently taps must be thermostatically
controlled.
Installation is similar as for a standard bath except
that twin wastes are supplied to increase drainage
rate & to ensure the bath can be drained if one
waste fails. The bath should be installed rigidly to
ensure there is no movement or sagging of the floor
when bath is used.
Consideration should be given to lowering the
wastes below the floor level to keep the step
threshold to a minimum to assist customer’s ability
to step into the bath. Use only shallow waste traps.
If fitting in an alcove ensure the bath freely goes
into position as sideways pressure can distort the
doorway.
THE SOLARNA SHOWER BATH IS
SUPPLIED WITH THE FOLLOWING
COMPONENTS:-
– Bath (LH or RH door opening) with Front Panel
– Shower Screen
– Twin Waste kit
– 2 x wall br 2 x Bath Feet - supplied loose
OTHER ITEMS REQUIRED
– Thermostatic Valve (TMV22 for high flow rate)
MUST BE INSTALLED IN ALL CASES.
– Bath Taps/Shower mixer
OPTIONAL ITEMS:
– Universal end panel (not handed)
1
IMPORTANT NOTES
1700
850
840
700
380
320
860
1700
535
1400
700
850
SHOWN AS LH DOOR
DOOR STEP THRESHOLD
- 195 min. (to upper lip)
90
90
65
65
