7
● S&H>(PITCH) MOD - the chaotic stepped voltage output from Sample
& Hold is normalized to the pitch MOD jack. The amplitude of this input
signal is then adjusted using the filter MOD fader.
● SEQ>TRIG - the sequencer produces 3 output signals called CV,
SLIDE G (slide gate), and ENV G (envelope gate). The envelope gates are
normalized to the TRIG (trigger) input of the envelope generator.
● EDGE>SAMPLE - the EDGE output is normalized to the Sample &
Hold trigger input. This means the S&H will sample the signal at its input
(TRI) every time it receives a trigger at the SAMPLE input.
● TRI>RATE* - the TRI output of the oscillator modulates the RATE of
the envelope.
*This is a hardwired normalization that cannot be disabled (except by
cutting the TRI>RATE solder jumper on the circuit board)
PATCHBAY
