Installation and Maintenance Manual: Shoe Sorter
_____________________________________________________________________________________________
Installation and Mai ntenance Manual: Shoe Sorter
Published October 2019
Rev.A1
26
Conveyor belt tracking should only be performed by trained personnel who
understand the hazards of the conveyor in operation.
Please make sure that the E-stop for the AC motor is operational prior to running the
conveyor. The E-stop may be required to quickly kill power to the AC motor to
preserve the life of the belt for tracking purposes.
Figure 13-Side View of Knife Edge Conveyor
9.
The snub rollers are used to adjust tracking of the AC belt. Run the conveyor briefly and see which
direction the belt is tracking towards.
10.
If the belt is tracking towards the right, move the left side of the snub roller forward. If the belt is
tracking towards the left, move the right side of the snub roller forward.
