Bass Slammer FMUST05D12U Installation Instructions Download Page 1

Page: 1 / 4

Enclosure Volume: 1.2 Cubic Foot

READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING

MOUNTING LOCATION:

The enclosure mounts in the trunk of the Mustang Coupe and Convertible on the rear passengers’

side.

TOOLS FOR INSTALLATION:

Powered Screwdriver

#2 Phillips Head Bit

6” Bit Holder Extension

Wire Cutters

INSTALLATION:

Follow the steps below

. Place enclosure in passengers’ side of cargo area.

Make note of the terminal location and then move enclosure aside to route wires to that location.

Connect speaker wires from ampliﬁer to enclosure, positive to red terminal and negative to black terminal.

Fold the corner of the ﬂoor mat back under itself, as shown below.

. Place enclosure into corner of trunk with its front edge over the folded section of ﬂoor mat. Make sure the enclosure is

pressed ﬁrmly against the side walls of the trunk liner and tail light.

FMUST05D12U

Summary of Contents for FMUST05D12U

Page 1: ...ow 1 Place enclosure in passengers side of cargo area 2 Make note of the terminal location and then move enclosure aside to route wires to that location 3 Connect speaker wires from ampli er to enclos...

Page 2: ...nesses Wire colors for the left rear speakers are Tan Yellow positive and Grey Light Blue negative Right rear speaker wire colors are Orange Red positive and Brown Pink negative Tap into wires with th...

Page 3: ...0 would be calculated by dividing 100 by 60 months 1 66 month multiplied by 23 the months remaining in the warranty period for a prorated warranty amount of 38 33 You are responsible for all costs for...

Page 4: ...LL NOT BE LIABLE FOR INCIDENTAL INDIRECT CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MITEK PRODUCT ITS USE OR PERFORMANCE Incidental damages include but are not limited t...