Bass Pro Shops 8 Rod Standing Rack - Owner’s Manual
Thank you for purchasing a Bass Pro Shops rod/combo storage system. Throughout these assembly instruc-
tions, we have included helpful tips to make this assembly process easier.
NOTE: A Phillips screwdriver is necessary for the assembly of this item (not included).
Parts List
A.
Upright Pieces – 2
B.
Upper Notched Cross Piece – 1
C.
Rod Support Cross Piece – 1
D.
Bass Pro Shops Logo Cross Piece – 1
E.
Screws – 12
F.
Screw Receivers – 12
G.
Screw Hole Plugs – 12
H.
Wood Pegs – 4
I.
Lower Notched Cross Piece – 1
Assembly Instructions
Compare your parts to the items in the diagram and parts listing. If you notice that a part is missing, there is
no need to return the rack. Please call 1-800-BASS-PRO for a free replacement. Please be ready to provide the
model number of the rack and the number or letter of the part from the parts listing to our customer service
representative.
1. Locate an upright piece (A), the Bass Pro Shops logo cross piece (D), 2 screws (E), and 2 screw receivers (F).
Choose an upright piece to begin the assembly. Note that the screw holes on the upright piece are larger
on one side than the other. The larger holes should always be oriented to the outside of the unit. On the
side of part D opposite the logo there are 4 holes. Insert the 2 screw receivers into these holes with the
threaded opening of each part aligned with the holes exiting the end of the piece. Find the 2 correct
corresponding holes on the upright piece, indicated in the image. Make sure the logo faces outward to
the contoured side of the upright piece. Insert 2 screws through the holes on the upright, then into the
end holes of part D so that the screws can be threaded into the screw receivers. Use the screwdriver to
tighten both screws snugly.
A
B
I
C
D
E
F
G
H
D
A
E
back view
F
E
F
F
BP171366
仅供观看
(only
for
viewing)
勿打印
(do
not
print)
