AW00136902000
BCON Interface
Basler dart BCON
37
5.2.6
Sync Pattern
Whenever the frame valid bit (FVal) is low and the camera is not sending frame information or line
checksum data, a fixed sync pattern is transmitted. This allows you to set up the correct word
alignment.
5.2.7
BCON Output Bits
The BCON interface provides two bits that can be used to transmit two camera output signals:
Output 0 and Output 1.
Output 0 and Output 1 are transmitted on data lane X0 at position 0 and 1 (see Figure 21 on
).
Depending on the camera model, the following output signals can be available:
Flash Window
Exposure Active
User Output 1
User Output 2
For more information about configuring output signals, see Section 8.2 on
X0
X1
X2
X3
WordClk
Clock cycle
MSB
LSB
Fig. 22: BCON Sync Pattern