Basler daA1280-54bc, User Manual

Page: 36 / 144

Physical Interface AW00136902000
28 Basler dart BCON
4.3.3 Output Voltages
4.4 Timing Characteristics
4.5 LED Indicator
There is an LED indicator on the back of the camera board (see Figure 18 on page 23 ).
Pin Name Minimum Nominal
(recommended)
Maximum Notes
X1-; X1+
X2-; X2+
X3-; X3+
X4-; X4+
XCLK-; XCLK+
1.125 V 1.25 V 1.375 V Common mode voltage
247 mV - 600 mV Differential voltage
Table 9: Output Voltages (LVDS Outputs - Data Lanes and Clock Lines)
Pin Min. Max. Notes
XCLK 20 MHz 84 MHz Selectable via control interface.
Settable in steps of 8, i.e.
20 MHz, 28 MHz, 36 MHz, etc.
X0-X3 140 Mb/s 588 Mb/s Selectable via control interface.
I2C_SCL 0 kHz 400 kHz In the I²C-Bus Specification and
User Manual , this mode is called
"fast-mode" with 400 kbit/s.
Table 10: Timing Characteristics
Green LED is ... Description
Dimming up/down The camera is being configured.
Lit permanently Camera is configured and operative.
Blinking rapidly Internal error.
Table 11: LED Statuses