manualshive.com logo in svg

Basler BE1-951, Instruction Manual

The Basler BE1-951 Instruction Manual provides detailed guidance on how to maximize the functionality of this advanced product. Easily download the manual for free from manualshive.com to unlock the full potential of your Basler BE1-951. Ensure proper installation and operation with this essential user manual.

Share
Download
background image

BE1-951 

Testing and Maintenance

i

SECTION 13 • TESTING AND MAINTENANCE

TABLE OF CONTENTS

SECTION 13 • TESTING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1

GENERAL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
TESTING PHILOSOPHIES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1

Acceptance Testing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
Commissioning Testing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-1
Periodic Testing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Functional Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2

TESTING AND TROUBLESHOOTING AIDS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2

Performance Testing  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Relay Self-Test  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-2
Status Reporting Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-3
Event Reporting Features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-3

ACCEPTANCE TESTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-3

Test Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-3
Power Up  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-5
Communications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-5

Set up the relay to communicate with the PC: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-5

Style Number And Serial Number Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6
IRIG Verification (If Used) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6
Contact Sensing Inputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6
Control Outputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-6
Current Circuit Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7
Three-Phase Voltage Circuit Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-7
Power Reading Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-8
Auxiliary Voltage Input Verification-VX and VX 3rd (Fundamental and Third Harmonic) . . . 13-9
Line and Bus Angle, Frequency, and Slip Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-9

COMMISSIONING TESTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-9

Digital I/O Connection Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-10

Contact Sensing Inputs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-10
Output Contacts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-10

Virtual Selector Switches (If not used, skip to Virtual Control Switch)  . . . . . . . . . . . . . . . . . 13-11

Virtual Control Switch (If not used, skip to Protection and Control Function Verification) 13-11

Protection and Control Function Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-11
Verify Other Set Points as Appropriate  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
Report and Alarm Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12

Clock Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-12
Energy Data and Demand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Breaker Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Relay Trouble Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Major/Minor/Logic Programmable Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Targets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Fault Summary Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Sequence of Events Recorder (SER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-13
Just Prior to Energizing--Report Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
In Service Readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14

PERIODIC TESTING  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14

Settings Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14
Analog Circuit Verification  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15

MAINTENANCE OF BACKUP BATTERY FOR REAL TIME CLOCK . . . . . . . . . . . . . . . . . . . . . 13-15

To Replace Battery in H1 Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
To Replace Battery in S1 Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-16

Courtesy of NationalSwitchgear.com

Summary of Contents for BE1-951









































































































































































































































































































































































































































Reviews:

No comments

Related manuals for BE1-951

ALLTEC DynaShield ADS 2F Series User Manual And Installation Instruction preview
DynaShield ADS 2F Series
Brand: ALLTEC Pages: 12
Alfred DB2 Series Quick Start Manual preview
DB2 Series
Brand: Alfred Pages: 2
Sony RM-Y908 Service Manual preview
RM-Y908
Brand: Sony Pages: 2
Sony QUALIA KDS-R50XBR1 Specifications preview
QUALIA KDS-R50XBR1
Brand: Sony Pages: 2
Sony KV-34HS510 - 34" CRT TV Specifications preview
KV-34HS510 - 34" CRT TV
Brand: Sony Pages: 1
Sony KPR-41EXR95 Operating Instructions Manual preview
KPR-41EXR95
Brand: Sony Pages: 74
Sony KP-HR43K90J Service Manual preview
KP-HR43K90J
Brand: Sony Pages: 131
Sony KP-XR432K90 Service Manual preview
KP-XR432K90
Brand: Sony Pages: 172
Sony kp-fw46 Operating Instructions Manual preview
kp-fw46
Brand: Sony Pages: 628
Tektronix KEITHLEY 2600B-PM-2 User Manual preview
KEITHLEY 2600B-PM-2
Brand: Tektronix Pages: 6
i4Technology Dog STOP Flash + User Manual preview
Dog STOP Flash +
Brand: i4Technology Pages: 9
Samsung PCL 6215R Instructions Manual preview
PCL 6215R
Brand: Samsung Pages: 67
ABB POLIM Operating Instructions Manual preview
POLIM
Brand: ABB Pages: 16
Samsung PLK405W - PLK - 405W Instruction Manual preview
PLK405W - PLK - 405W
Brand: Samsung Pages: 64
Hitachi 53SDX01B Service Manual preview
53SDX01B
Brand: Hitachi Pages: 146
Hitachi C43-FD7000 Instruction Manual preview
C43-FD7000
Brand: Hitachi Pages: 56
Hitachi 51F710 Service Manual preview
51F710
Brand: Hitachi Pages: 41
Hitachi 51SWX20B Service Manual preview
51SWX20B
Brand: Hitachi Pages: 189

Brands by name

Popular brands

Load more brands