Configuring the Camera
BASLER A640
f
4-25
DRAFT
Register Name:
ISO EN / Continuous Shot
Offset from Base Address:
0x614
Field
Bit
Description
Continuous Shot
0
When the camera is set for video Format 0 or Format 7, this field con-
trols the “continuous shot” video transmission mode.
1 = start “continuous shot” transmission
0 = stop “continuous shot” transmission
Default = 0 on all A640f cameras
---
1 ... 31
Reserved
Register Name:
Memory Save
Offset from Base Address:
0x618
Field
Bit
Description
Save
0
Writing a 1 to this field will cause the current settings in the work con-
figuration set (see Section
) to be saved to the memory channel
specified in the Memory Save Channel register (see page
).
(This register self clears.)
---
1 ... 31
Reserved
Register Name:
One Shot / Multi Shot
Offset from Base Address:
0x61C
Field
Bit
Description
One Shot
0
When the camera is set for video Format 0 or Format 7, this field con-
trols the “one shot” video transmission mode.
1 = transmit one frame of video data
(Field is self cleared after transmission.)
Default = 0 on all A640f cameras
Multi Shot
1
Multi shot is not supported on A640f cameras.
---
2 ... 15
Reserved
Count Number
16 ... 31
The count number for multi shot is not supported on A640f cameras.
Summary of Contents for A640F
