Basler A400K, User Manual

Page: 11 / 176

Introduction
Basler A400k 1-3
DRAFT
1.3 Performance Specifications
Specifications A402
k
A402
kc
A403
k
A403
kc
A404
k
A404
kc
Sensor Micron MV40 CMOS active-pixel digital image sensor
Number of Pixels 2,352 (H) x 1,726 (V) (4,059,552 pixels)
Pixel Size 7.0 µm x 7.0 µm (7.0 µm pixel pitch)
Pixel Fill Factor 55%
Sensor Imaging
Area 16.46 mm (H) x 12.10 mm (V), 20.43 mm (Diagonal)
Mono or Color Mono Color Mono Color Mono Color
Digital Responsivity 2500 LSB/lux*s
Quantum Efficiency (Figure
1-2 )
(Figure
1-3 )
(Figure
1-2 )
(Figure
1-3 )
(Figure
1-2 )
(Figure
1-3 )
Dynamic Range 54 dB
Shutter Fast electronic rolling shutter
PRNU
(Photo Response
Non-uniformity) Typically < 1% rms according to the sensor manufacturer’s specification
Lower if PRNU shading correction is used.
DSNU
(Dark Signal Non-
uniformity) 0.1% rms (if no DSNU shading correction is used)
Lower if DSNU shading correction is used.
Kdrk
(Dark Current Tem-
perature Coefficient) 100% / 8° C
Pixel Clock Speed 50 MHz
Frame Rate
(at full resolution) 24 fps
progressive scan 48 fps
progressive scan 48 fps
(in 4 tap mode)
96 fps
(in 8 tap mode)
progressive scan
Video Data Output
Type Camera Link LVDS
Base configuration
RS-644 LVDS when
used with the optional
Basler Interface Con-
verter (k-BIC)
Camera Link LVDS
Medium configuration Camera Link LVDS
Medium configuration
(in 4 tap mode)
Camera Link LVDS
Full configuration
(in 8 tap mode)
Table 1-2: A400k Performance Specifications