Basler Vision Technologies Sprint Series, User Manual

Page: 139 / 236

Features
Basler sprint Mono Cameras 129
6.3.4 Copying the Factory Shading Values into the
User Shading Values File
As explained in Section 6.3 on page 121 , the camera contains a set of factory determined shading
correction values in a file in its non-volatile memory. As explained in Section 6.3.2 on page 123 , you
can also generate a set of "user" shading values and save them to a separate file in the non-volatile
memory.
In some situations, it may be advantageous for you to be able to simply copy the contents of the
factory shading values files into the file for user shading values
You can copy the values from the factory file into the user file with the Camera Configuration Tool
Plus (CCT+) or by using binary read/write commands from within your own application to set the
camera’s bulk data control and status registers (CSRs).
With the CCT+
With the CCT+ (see Section 7.1 on page 156 ), you use the File Name Select parameter and the
Copy button in the Shading Files parameters group to copy the data in the factory shading values
file to the user shading values file.
By Setting CSRs
You can copy the data in the factory shading values file to the user shading values file by writing
values to the shading values bulk data CSR.
Section 7.2.3 on page 188 explains bulk data CSRs and using the bulk data copy process.
Section 7.3.1 on page 197 explains using read/write commands.