3
starts to blink rapidly. When the blue LED is blinking rapidly, the Bluetooth® retro phone is in
pairing mode.
Step 4: Follow your cell phone’s instruction manual. This normally involves going to “Setup”,
“Connect”, “Connection” or “Bluetooth®” menu on your cell phone and then selecting the
option to “Look for Device” or “Discover” to initiate the Bluetooth® pairing process.
Step 5: Your cell phone will scan for local Bluetooth® devices and should locate the Bluetooth®
retro phone in about 10-20 seconds.
Step 6: When you pair your cell phone with the Bluetooth® retro phone, it will prompt you to enter a
PIN– enter “0000”.
Step 7: At this point, you should be able to place a call using your cell phone keypad, phone book,
or voice dial and use the Bluetooth® retro phone instead of your normal cell phone handset.
The Bluetooth® retro phone should function much like any hands-free headset.
- To answer an incoming call, press the silver button.
- To end the current call, press the silver button.
- To turn off the Bluetooth® retro phone, press and hold the silver button for about
3 seconds until you hear a short sound and the blue LED turns off.
Safety precautions:
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the
product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos brands and product names are trademarks or registered trademarks of their respective
holders and are hereby recognized as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not
accept liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products
should not be mixed with general household waste. There is a separate collections system for
these products.
