• Make sure a memory card is inserted.
• Perform a measurement. Use the trigger button (6) to capture the desired image.
• The measuring instrument will create a separate folder named “Photos” in the memory card.
The data on the memory card can be read by the measuring instrument or a computer via an
optional memory card terminal.
d) Automatic power-off feature
The camera enables automatic power-off after a preset time. This function protects the batteries
and extends the operating time. The automatic power-off function can be disabled to allow
longer measurements to be carried out.
The automatic power-off can be set in the system settings under the “AutoOff” menu item.
12. Cleaning and maintenance
a) General information
To ensure the accuracy of the thermal imaging camera over a long period of time, it should be
calibrated at least once a year.
The measuring instrument is absolutely maintenance-free except for occasional cleaning and
battery replacement.
Regularly check the device for technical safety, for example, for damage to the casing
or deformation, etc.
b) Cleaning the casing
Always observe the following safety information before cleaning the device:
Do not use abrasive detergents, petrol, alcohol or other similar chemicals to clean the
device. These may corrode the surface of the measuring instrument. In addition, the
vapours emitted by these substances are explosive and harmful to your health. Do not
use sharp-edged tools, screwdrivers or metal brushes to clean the device.
To clean the device and the display, use a clean, lint-free, antistatic and slightly damp cleaning
cloth. Allow the device to dry completely before using it again.
29
